Keri-systems TRB Bedienungsanleitung PDF herunterladen (Seite 3)

Tamper Relay Board

Installation Guide

Page 3 of 3 P/N: 01513-001 Rev. D

NXT Tamper Event Report Connection

• allows the NXT controller to record an Enclosure Tamper event

• connect the provided cable between J2 on the TRB and J1 on the NXT controller – this is a keyed

connection so be sure to orient the plug correctly

NOTE: The Tamper Event Report connection does not apply to the PXL. The PXL does not have the

ability to report Enclosure Tamper events.

4.0 Unit Operation

The TRB is operational as long as power is supplied to the unit. Two LEDs on the TRB provide unit

status.

• Red LED – indicates alarm condition

• Green LED – indicates non-alarm condition

Verify tamper switch operation by toggling the tamper switch(es) and observing the red and green

LEDs follow tamper switch state.

Contact Keri Systems:

End of document.

Keri USA Keri UK, Ireland, Europe

2305 Bering Drive

San Jose, CA 95131

Unit 17

Park Farm Industrial Estate

Ermine Street

Buntingford

Herts SG9 9AZ UK

Telephone: (800) 260-5265

(408) 435-8400

Telephone: + 44 (0) 1763 273 243

Fax: (408) 577-1792 Fax: + 44 (0) 1763 274 106

Web: www.kerisys.com Web: www.kerisystems.co.uk

1 2 3

Keine Kommentare

Keri-systems TRB Bedienungsanleitung Seite 3